Geoscan 401. Assembly and application

_images/401.png

Geoscan 401 – multifunctional complex, that included multirotor unmanned aerial vehicle (UAV) and ground control system (GCS).

Kit

  • Geoscan 401 unmanned aerial vehicle (UAV)

  • UAV’s transport container

  • Payload: *

    • customized Sony А6000 camera;

    • customized Sony DSC-RX1 camera;

    • gyro-stabilized optical-electronic system with FullHD videocamera;

    • gyro-stabilized optical-electronic system with thermal imager 640x480;

    • digital broadband video receiver;

    • onboard geodetic GNSS receiver Topcon with antenna (L1-L2, GPS/GLONASS/BeiDou);

    • quantum magnitometer Geoscan QM-Rb-1.

  • 37 V LiPo battery

  • Left rotation propeller - 2 PCs

  • Right rotation propeller - 2 PCs

  • Charge station with transport container

  • Ground Control Station (GCS) based on laptop with software *

  • GCS’s Table *

  • Mouse

  • CRL modem

  • CRL modem’s antenna

  • CRL modem’s pole

  • SDHC card 64 Gb - 2 PCs *

  • SD card 4 Gb - 2 PCs *

  • Wrench, 13 mm

  • Nut (right hand thread) - 2 PCs

  • Nut (left hand thread) - 2 PCs

  • Washer - 4 PCs

  • USB cable

  • GCS “Video” *

  • Spare parts and accessories:

    • Left rotation propeller;

    • Right rotation propeller;

    • Nut (right hand thread) - 2 PCs;

    • Nut (left hand thread) - 2 PCs;

    • Washer - 4 PCs;

    • CRL modem’s antenna.

* - Depends on equpment

Technical parameters

Type of UAV

quadcopter

Engine

electric, brushless - 4 PCs

Battery

37 V LiPo

Launch/Landing

verticaly, in automatic mode, from/to 5 m area

Flight duration

up to 1 h

Max wind speed

12 m/s

Speed of flight

0-50 km/h

Min safe flight altitude

25 m

Max flight altitude over start point

500 m

Max takeoff weight

9,3 kg

Max payload mass

2,5 kg

Preparation time before takeoff

5 min

UAV’s overall dimensions

folded 70х25х20 cm

unfloded 150х150х43 cm

Photo shooting area in one flight

2 cm/pix quality

0,95 km²

3 cm/pix quality

1,4 km²

5 cm/pix quality | 2,1 km²

Operating temperature range:

-20 to +40 °C

-40 to +20 °C (“Arctic” battery)

Maintenance

Visually inspect UAV for a damage after each flight.

If a propellers are damaged, you can replace it yourself using spare parts and tools from the kit.

If structural damage to the airframe or systems is detected, contact Geoscan support.

After 80 flights it is recommended to send your UAV to the manufacturer for inspection and maintenance.

Storage

Geoscan 401 complex (without battery) are recommended to be stored in a transport containers in dry rooms at a temperature of 5 to 25 °C and relative humidity not more than 80% without condensation. Shelf life - 2 years.

Batteries should be stored in a cool and dry place, without direct sunlight, at a temperature of 5 to 25 °C and a relative humidity of 80% without condensation. The optimum voltage level when placing the battery to storage: 38,5 V. Shelf Life - 1 year.